Sorry Had to repost... Error downloading.. Here is the Software..
Tony VVT
Attachment deleted by Mod
Tube Cad Software
Moderators: pompeiisneaks, Colossal
- Noel Grassy
- Posts: 426
- Joined: Thu Feb 09, 2006 5:29 am
- Location: Vacuum Tube Valley-Cali
Re: Tube Cad Software
talbany, thanks very much for the software. I haven't opened it yet but
I imagine you wouldn't have offered it if it wasn't useful/functional.
I imagine you wouldn't have offered it if it wasn't useful/functional.
All excellent things are as difficult as they are rare__B Spinoza
Re: Tube Cad Software
Tony,
This software appears to be commercial software. I deleted the attachment.
Omar
This software appears to be commercial software. I deleted the attachment.
Omar
Tone by misadventure
Re: Tube Cad Software
Omar
Sorry for the inconveniance.. The software was given to me so I assumed it was Freeware.. Sorry All..
Tony VVT
Sorry for the inconveniance.. The software was given to me so I assumed it was Freeware.. Sorry All..
Tony VVT
Re: Tube Cad Software
Good callOmar wrote:Tony,
This software appears to be commercial software. I deleted the attachment.
Omar
I own TubeCad and it is worth every penny of the $29
http://www.glass-ware.com/tubecad/
Re: Tube Cad Software
I'm sure it is. Does anybody know of a freeware/shareware alternative for us "po' folk"?drz400 wrote: Good call
I own TubeCad and it is worth every penny of the $29
http://www.glass-ware.com/tubecad/
W
- glasman
- Posts: 1446
- Joined: Wed Jan 19, 2005 10:37 pm
- Location: Afton, MN (St Croix River Valley)
- Contact:
Re: Tube Cad Software
LT Spice from linear technologies works extremely will and is free.
Also check out Duncan Munroes site for spice modesl for many common tubes.
I use this program almost daily.
Gary
Also check out Duncan Munroes site for spice modesl for many common tubes.
I use this program almost daily.
Gary
Last edited by glasman on Tue Aug 12, 2008 8:24 pm, edited 1 time in total.
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
Re: Tube Cad Software
$29 ? The manual is worth thatWayne wrote:I'm sure it is. Does anybody know of a freeware/shareware alternative for us "po' folk"?drz400 wrote: Good call
I own TubeCad and it is worth every penny of the $29
http://www.glass-ware.com/tubecad/
W
Re: Tube Cad Software
This is the one I tried to post!!! A Must have..
T
T